ARF/XRF/QRF Software

MOGLabs is continually striving to improve the software and firmware of our products, to help our customers get the most of what our products can provide.

Check back for updates or join our mailing list to receive notifications of important changes.

For help with controlling your device to a computer, check our detailed drivers and connection guide

Latest firmware

Firmware updates can be installed using the "Firmware update tool" distributed with mogrf, and the update process is described in Appendix B of the manual.

Release notes describing changes are detailed in the CHANGES.TXT document within each ZIP file.

It is strongly recommended to ensure that the latest version of mogrf is used to install updates on the device.

WARNING: ARF/XRF Rev2 units (serial numbers A0x211...) with original firmware (pre-2017) may have difficulty applying upgrades. Please contact MOGLabs support if you encounter issues with the upgrade process.

GUI application, mogrf

mogrf application

A fully featured graphical-user interface for controlling and communicating with ARF/XRF/QRF synthesizers over USB or ethernet. Includes the ability to control output parameters, modulation settings, and table mode execution.

The package also contains the firmware update tool for installing updates into the device, which will start automatically where incompatibility is detected.

It also contains the "XRF upgrade application" to unlock the advanced functionality contained within XRF devices, for customers who have purchased the upgrade.